Autoclaves KTR-30L Japan

Autoclaves
Model: KTR-30L
Brand: ALP
Origin: Japan

Technical Specifications
Volume: 45 litres Chamber (dia. x depth): f 300 x 640 mm
Usable max. press.: 0.16 Mpa Usable max. temp.: 1250C Sterilization: 110 ~ 1250C
Sterilization system: saturated steam generated by sheathed electric heater
Main controller: Digital temperature/ time controller
Timer: 1 – 60 min. 59 sec (operates after the set temperature is reached)
Operation star: PUSH-ON start button swith
Air exhaust valve: Gravity substitution system by temperature sensing-time controlled solenoide vale
Water lack preventor: Automatic cut-off system by a sensitive thermostat and relay (Heater cut off, Buzzer & Red lamp warning)
Exhaust valve: manual needle valve to be opened only in rapid exhaust required
Drain valve: manual ball valve (inner dia.: 10 mm)
Sterilization pattern: (Tempereture/ time set) ® PUSH-ON start ® Sterilization ® Natural cooling ® Completion buzzer. RUN lamp off at safe temp. for lid open (800C)
Safety devices: Water lack preventor, Over pressure safety switch, Saftey valve
Electric safety: Breaker for over current & earth leakage
withstand voltage: 1400 V, 2 sec., insulation: 100 MΩ ~ (500VDC)
Safety valve operation: 0.18 Mpa Water test pressure: 0.36 Mpa
Chamber & lid: stainless steel SUS304 shiny polished, lid gasket: molded silicon rubber
Outer panel: upper surface: SUS304, main body: steel with baked enamel, caster (front two with stopper) Electricity: AC 220 V, 1 phase, 50/60Hz Power requirement: 2.6 kW (12 A)
Outer size: W 600 x D 380 x H 980 mm

Accessories:
+ Stainless wire basket f 270 x 300 mm, 2 pcs
+ Exhaust drain receiver bottle, 1 pc